Backflow test questions start with your water provider
A backflow test checks whether the assembly on your water line still stops water from being pulled back into the supply. People also call this a backflow preventer test or an annual backflow test. Irrigation lines, some commercial connections, and any address that got a utility notice are the usual reasons someone books one. For a private device on a Lakeland water account that the city does not maintain, the City of Lakeland agreement requires a test once a year. The owner sends the results to Water Operations at 1000 East Parker Street within 10 days of that annual test date. If another utility serves the address, follow the notice on the bill.
What a backflow test is
The test is about the device on the supply, not about a slow drain. The plumber uses the test report, the identification tag, and the assembly itself. Backflow preventer installation and repair is the page for a leak, a damaged device, or a replacement.
Who needs a backflow preventer test
Book a test when one of these is true. If you are not sure, call your water provider before you book, and tell us what they said.
- You have an irrigation line with a backflow preventer.
- The property is commercial and the utility asked for a test.
- A notice from the water utility names this assembly.
What happens during the test
Have the last report and the utility notice ready if you have them. The plumber checks the assembly, runs the test, and tells you what the result was before leaving. On a Lakeland water account, the city agreement says the tester must have finished a backflow course the city accepts, and the current certification must be on file with Lakeland Water Distribution.
Residential backflow testing
A residential backflow test is usually the assembly on an irrigation line. People also search for a backflow test on a sprinkler system. That test is the device on the supply, often on a pad beside the house. It is not a check of the sprinkler heads in the yard.
The question is whether that device still stops water from being pulled back into the city line when pressure changes. If the house has no irrigation assembly and no letter from the utility, ask the utility before you book. A slow drain is a different visit.
Backflow testing requirements in Lakeland
For a private device on a Lakeland water account that the city does not maintain, the City of Lakeland agreement requires the test once a year. The owner sends the results to Water Operations at 1000 East Parker Street within 10 days of the annual test date.
The person who runs the test must have finished a backflow course the city accepts, and the current certification must be on file with Lakeland Water Distribution. That rule is for those private devices. It is not a rule that every house without an assembly needs a test. If another utility is on the bill, follow that notice.
What the plumber brings
The plumber brings the gauges and connects them to the test cocks on the assembly. You do not buy a backflow test kit for this visit. Both shutoff valves need to be reachable. If a valve will not turn, say so when you book.
Have the last report and the utility notice if you have them. The plumber tells you the result before leaving.

What happens if the assembly fails
Keep the report. The Lakeland agreement says a device that does not test satisfactorily has to be retested, repaired, or replaced, and a satisfactory result has to be sent in within 10 days. Read your own notice in case it prints a different date.
Repair and replacement are on the backflow preventer page. What to have ready the day it fails is in the failed-test post.
Lakeland and Polk County
We test and repair these assemblies for homes in Lakeland, Bartow, and Plant City. The once-a-year rule above is the City of Lakeland agreement for a private device the city does not maintain. Other cities: follow the utility named on your bill.
Request the visit at contact or call (863) 667-6364. The form uses the same backflow job as installation and repair. Say in the notes that you need a test.